SAT-10545-7 Surface Abrasion Tester
An instrument to determine the abrasion resistance of glazed ceramic tiles to ISO 10545-7

The Surface Abrasion Tester enables glazed tile samples to be locked onto the tester bench and an abrasive charge is added to a cup which has defined dimensions
The sample is submitted to a series of swinging vibrations at the end of which, after surface cleaning, the tile is compared with other samples which have not been abraded.
The sample is then classified according to the number of revolutions carried out with no visible abrasion marks on its surface
Features
* Solid and easy to use
* Automatic stop at the end of pre-set revolutions
* Variable speed
* Can be operated with wet charges (PEI) or dry charges (MCC)
* Power 380 V, 50 Hz, three phases

Can be supplied with 1, 3 or 6 test stations
Each tester is supplied with
1 set of wet abrasive charges (PEI)
1 set of dry abrasive charges (MCC)
1 set Corundum (white fused aluminium) for PEI charges (50 cc)
1x 50 cc of Silicon Carbide

To perform this test you will also need
a PEIBOX/B Observing System

a Laboratory drying oven

SAT10545-7-1 Surface Abrasion Tester with 1 test station
SAT10545-7-3 Surface Abrasion Tester with 3 test stations
SAT10545-7-6 Surface Abrasion Tester with 6 test stations

Accessories
Float Glass Calibration Plate SAT10545-7-FGC
dimensions 100x100x6 mm with marked calibration side

Abrasive packs (1 pack per test station) SAT10545-7-ABRP comprising
PEI Abrasive Pack (500gm)
MCC Abrasive Pack
Corundom (white fused alumina
Silicon Carbide